Zum Inhalt springen Zur Hauptnavigation springen Zum Seitenende springen

Dr.-Ing. Martin Seyring

Wissenschaftlicher Mitarbeiter Rasterelektronen- und optische Mikroskopie

Hochschule Schmalkalden
Fakultät Elektrotechnik
Blechhammer 4-9

98574 Schmalkalden

Haus: B, Raum: 0003

+49 3683 688 5203

+49 3683 688 985203

Zum Kontaktformular
Dr.-Ing. M. Seyring

Researchgate >    |    LinkedIn >    |    ORCID >    |    Scopus >

 

Lehre        

  • Werkstoffe und Bauelemente der Elektrotechnik (Physik III, EI)
  • Werkstofftechnik (Maschinenbau)
  • Angewandte Chemie (Medizintechnik)
  • Materialprüfung (Materialwissenschaft - Lehrauftrag der Friedrich-Schiller-Universität, Jena)

 

Labore

 

Forschung

  • Materialforschung an Metallen und elektronischen Funktionswerkstoffen
  • Raster- und Transmissionselektronenmikroskopie (REM, TEM, STEM)
  • Festkörper-Phasenumwandlungen an inneren Grenzflächen sowie deren Thermodynamik und Kinetik
     

Veröffentlichungen

Beiträge in begutachteten internationalen Fachzeitschriften

[57] R. Knechtel, M. Wenig, M. Seyring, L. Hauck, A. Rana:
The use of glasses in low-temperature wafer bonding processes
Japenese Journal of Applied Physics 64(4), 2025, 04SP41,  DOI:10.35848/1347-4065/adc00d
[56] R. Wonneberger, J. Apell, M. Seyring, W. Wisniewski, H. Stöcker, A. Undisz:
One parallel in early oxidation stages of Cr-containing alloys
Materials Today Advances 24, 2024, 100532,  DOI:10.1016/j.mtadv.2024.100532
[55] R. Knechtel, M. Seyring, B. Bonitz, U. Meiselbach, K. Irrgang:
A contribution to temperature precision measurement by drift detection on Platinum-100 measuring resistors in thin-film technology
tm - Technisches Messen 91(10), 2024, 505,  DOI:10.1515/teme-2024-0070

[54]

Y. Fang, C. Yu, N. Kropotin, M. Seyring, K. Freiberg, M. Kolbe, S. Lippmann,P. K. Galenko:
Crystalline Microstructure, Microsegregations, and Mechanical Properties of Inconel 718 Alloy Samples Processed in Electromagnetic Levitation Facility
Crystals 14(3), 2024, 244,  DOI:10.3390/cryst14030244
[53] X. Gao, M. Seyring, X. Wen, Y. Tian, B. Zhang, Y. Wang, Y. Chen, S. Qiao, F. Wang, S. Liu, C. Yuan:
Thermodynamics and kinetics of interdiffusion in Ni//NiAl diffusion couples
 Journal of Alloys and Compounds 971, 2024, 172751,  DOI: 10.1016/j.jallcom.2023.172751
[52] S. Choupanian,W. Möller, M. Seyring, C. Pacholski, E. Wendler, A. Undisz, C. Ronning:
Ion Irradiation-Induced Sinking of Ag Nanocubes into Substrates
Advanced Materials Interfaces, 2023, 2300570,  DOI: 10.1002/admi.20230057
[51] J. Apell, R. Wonneberger, H. Stöcker, P. Meye, K. Freiberg, M. Seyring, S. Lippmann, A. Undisz:
Effect of Co vs. Fe content on early stages of oxidation of Co-Cr-Fe-Mn-Ni-Si complex concentrated alloys at 800 °C
Corrosion Science 225, 2023, 111594,  DOI: 10.1016/j.corsci.2023.111594
[50] R. Wonneberger, G. Kirste, M. Seyring, M. Hafermann, C. Ronning, M. Schaal, F. Otto, T. Fritz, A. Undisz:
Early oxidation stages of austenitic stainless steel monitored using Mn as tracer
Corrosion Science 223, 2023, 111434,  DOI: 10.1016/j.corsci.2023.111434
[49] J. Möbius, S. Lippmann, M. Seyring:
Vibratory polishing of multiphase CuZn30//CuZn80 diffusion pair for electron backscatter diffraction (EBSD) characterization
Practical Metallography 60 (6), 2023, 363-381,  DOI: 10.1515/pm-2023-1043
[48] N. Kropotin, Y. Fang, C. Yu, M. Seyring, K. Freiberg, S. Lippmann, T. Pinomaa, A. Laukkanen, N. Provatas, P. K. Galenko:
Modelling of solidifying microstructure of Inconel 718: Quasi-binary approximation
Modelling 4, 2023, 323–335,  DOI: 10.3390/modelling4030018
[47] E. Podlesnaia, P. Gerald Inangha, J. Vesenka, M. Seyring, H-J. Hempel, M. Rettenmayr, A. Csáki, W. Fritzsche:
Microfluidic-Generated Seeds for Gold Nanotriangle Synthesis in Three or Two Steps
Small 2023, 2204810,  DOI: 10.1002/smll.20220481
[46] K.E. Freiberg, M. Seyring, R. Wonneberger, M. Rettenmayr, A. Undisz:
Phase formation in the Ni-enriched zone below the surface oxide on NiTi
Intermetallics 154, 2023, 107817,  DOI: 10.1016/j.intermet.2022.107817
[45] M.L. Hupfer, J. Dellith, M. Seyring, M. Diegel, A. Dellith, S. Ghosh, M. Rettenmayr, B. Dietzek-Ivanšić, M. Presselt:
Bifacial Dye Membranes: Ultrathin and Free-Standing although not Being Covalently Bound
Advanced Materials 35 (1), 2023, 2204874,  DOI: 10.1002/adma.202204874
[44] S. Choupanian, W. Moller, M. Seyring, C. Ronning:
Low-energy ion channeling in nanocubes
Nano Research 16(1) 2023, 1522-1526,  DOI: 10.1007/s12274-022-4723-6
[43] A. Walnsch, T. Kaaden, P.D.B. Fischer, M. Motylenko, M. Seyring, A. Leineweber, S. Lippmann:
Formation of a nanoscale two-phase microstructure in Cu-Zn(-Al) samples with macroscopic concentration gradient
Materials Characterization 19, 2022, 112229,  DOI: 10.1016/j.matchar.2022.112229
[42] M. Seyring, M. Rettenmayr
Impact of crystallography at Ni/NiAl interfaces on the nucleation of Ni3Al
Acta Materialia 208 (8), 2021, 116713,  DOI: 10.1016/j.actamat.2021.116713
[41] J. Apell, R. Wonneberger, M. Seyring, H. Stocker, M. Rettenmayr, A. Undisz:
Early oxidation stages of a Co-Cr-Fe-Mn-Ni-Si complex concentrated alloy with Cr, Mn, and Si contents matching those of 316L stainless steel
Corrosion Science 190 (8), 2021, 109642,  DOI: 10.1016/j.corsci.2021.109642
[40] M. Seyring, F. Wanierke, T. Kaaden, S. Lippmann, M. Rettenmayr:
Influence of natural oxide layers at Ni/NiAl interfaces on Ni3Al phase formation
Materials Characterization 174 (7), 2021, 111032,  DOI: 10.1016/j.matchar.2021.111032
[39] W. Brehm, A.L. Santhosha, Z.G. Zhang, C. Neumann, A. Turchanin, M. Seyring, M. Rettenmayr, J.R. Buchheim, P. Adelhelm:
Mechanochemically synthesized Cu3P/C composites as a conversion electrode for Li-ion and Na-ion batteries in different electrolytes
Journal of Power Sources Adv. 6 (8), 2020, 100031,  DOI: 10.1016/j.powera.2020.100031
[38] R. Wonneberger, S. Lippmann, B. Abendroth, A. Carlsson, M. Seyring, M. Rettenmayr, A. Undisz:
Bridging the gap between high temperature and low temperature oxidation of 316 L
Corrosion Science 175, 2020, 108884,  DOI: 10.1016/j.corsci.2020.108884
[37] W. Brehm, A.L. Santhosha, Z.G. Zhang, C. Neumann, A. Turchanin, A. Martin, N. Pinna, M. Seyring, M. Rettenmayr, J.R. Buchheim, P. Adelhelm:
Copper Thiophosphate (Cu3PS4) as Electrode for Sodium-Ion Batteries with Ether Electrolyte
Advanced Functional Materials 30(19), 2020, 1910583,  DOI: 10.1002/adfm.201910583
[36] R. Wonneberger, M. Seyring, K. Freiberg, A. Carlsson, J. Rensberg, B. Abendroth, H. Stocker, M. Rettenmayr, A. Undisz:
Oxidation of stainless steel 316L-Oxide grains with pronounced inhomogeneous composition
Corrosion Science 149, 2019, 178-184,  DOI: 10.1016/j.corsci.2018.12.035
[35] R.A. Wahyuono, G.B. Jia, J. Plentz, A. Dellith, J. Dellith, F. Herrmann-Westendorf, M. Seyring, M. Presselt, G. Andra, M. Rettenmayr, B. Dietzek:
Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells
ChemPhysChem 20(24), 2019, 3336-3345,  DOI: 10.1002/cphc.201900714
[34] R.A. Wahyuono, A. Dellith, C. Schmidt, J. Dellith, A. Ignaszak, M. Seyring, M. Rettenmayr, J. Fize, V. Artero, M. Chavarot-Kerlidou, B. Dietzek:
Structure of Ni(OH)(2) intermediates determines the efficiency of NiO-based photocathodes - a case study using novel mesoporous NiO nanostars
RSC Advances 9(67), 2019, 39422-39433,  DOI: 10.1039/c9ra08785k
[33] K. Reuther, M. Seyring, M.A. Schmidt, M. Rettenmayr:
Convectionless directional solidification in an extremely confined sample geometry
Materialia 8, 2019, 100457,  DOI: 10.1016/j.mtla.2019.100457
[32] C.J. Li, M. Seyring, X. Li, Y.B. Zhong, Z.M. Ren, M. Rettenmayr:
Effect of Heat Treatment Combined with an Alternating Magnetic Field on Microstructure and Mechanical Properties of a Ni-Based Superalloy
Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 50A(4), 2019, 1837-1850,  DOI: 10.1007/s11661-019-05141-z
[31] M. Seyring, M. Drue, A. Kozlov, S.M. Liang, R. Schmid-Fetzer, M. Rettenmayr:
Phase formation in the ternary systems Li-Sn-C and Li-Sn-Si
Thermochimica Acta 659, 2018, 34-38,  DOI: 10.1016/j.tca.2017.11.002
[30] D.M. Liu, C. Dressler, M. Seyring, S. Teichert, M. Rettenmayr:
Reduced thermal conductivity of Bi-In-Te thermoelectric alloys in a eutectic lamellar structure
Journal of Alloys and Compounds 748, 2018, 730-736,  DOI: 10.1016/j.jallcom.2018.03.201
[29] S. Lippmann, C. Simon, S. Zechel, M. Seyring, U.S. Schubert, G. Wilde, M. Rettenmayr:
Determining solid/liquid interfacial energies in Al-Cu by curvature controlled melting point depression
Acta Materialia 147, 2018, 113-121,  DOI: 10.1016/j.actamat.2018.01.012
[28] R.A. Wahyuono, F. Hermann-Westendorf, A. Dellith, C. Schmidt, J. Dellith, J. Plentz, M. Schulz, M. Presselt, M. Seyring, M. Rettenmayr, B. Dietzek:
Effect of annealing on the sub-bandgap, defects and trapping states of ZnO nanostructures
Chemical Physics 483, 2017, 112-121,  DOI: 10.1016/j.chemphys.2016.12.002
[27] A. Simon, M. Seyring, N. Reger-Wagner, H. Richter, I. Voigt, M. Rettenmayr, U. Ritter:
Influence of carbon source and synthesis temperature on structural and morphological properties of carbon nanofibers synthesized on tubular porous ZrO2 layers
Diamond and Related Materials 78, 2017, 88-96,  DOI: 10.1016/j.diamond.2017.08.006
[26] M. Seyring, A. Simon, I. Voigt, U. Ritter, M. Rettenmayr:
Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction
Carbon 116, 2017, 347-355,  DOI: 10.1016/j.carbon.2017.01.107
[25] M. Drüe, M. Seyring, M. Rettenmayr:
Phase formation and microstructure in lithium-carbon intercalation compounds during lithium uptake and release
Journal of Power Sources 353, 2017, 58-66,  DOI: 10.1016/j.jpowsour.2017.03.152
[24] M. Drüe, S.M. Liang, M. Seyring, A. Kozlov, X.Y. Song, M. Rettenmayr, R. Schmid-Fetzer:
Phase formation in alloy-type anode materials in the quaternary system Li-Sn-Si-C
International Journal of Materials Research 108(11), 2017, 933-941,  DOI: 10.3139/146.111559
[23] W. Wisniewski, M. Seyring, C. Patzig, T. Hoche, A. Keshavarzi, C. Rüssel:
Bulk Crystallization in a SiO2/Al2O3/Y2O3/AlF3/B2O3/Na2O Glass: Fivefold Pseudo Symmetry due to Monoclinic Growth in a Glassy Matrix Containing Growth Barriers
Scientific Reports 6, 2016, 19645,  DOI: 10.1038/srep19645
[22] R.A. Wahyuono, B. Schulze, M. Rusu, M. Wachtler, J. Dellith, M. Seyring, M. Rettenmayr, J. Plentz, A. Ignaszak, U.S. Schubert, B. Dietzek:
ZnO Nanostructures for Dye-Sensitized Solar Cells Using the TEMPO+/TEMPO Redox Mediator and Ruthenium(II) Photosensitizers with 1,2,3-Triazole-Derived Ligands
ChemPlusChem 81(12), 2016, 1281-1291,  DOI: 10.1002/cplu.201600377
[21] R.A. Wahyuono, C. Schmidt, A. Dellith, J. Dellith, M. Schulz, M. Seyring, M. Rettenmayr, J. Plentz, B. Dietzek:
ZnO nanoflowers-based photoanodes: Aqueous chemical synthesis, microstructure and optical properties
Open Chemistry 14(1), 2016, 158-169,  DOI: 10.1515/chem-2016-0016
[20] D.M. Liu, J. Stotzel, M. Seyring, M. Drue, X.Z. Li, R. Schmechel, M. Rettenmayr:
Anisotropic n-Type Bi2Te3-In2Te3 Thermoelectric Material Produced by Seeding Zone Melting and Solid State Transformation
Crystal Growth & Design 16(2), 2016, 617-624,  DOI: 10.1021/acs.cgd.5b01015
[19] M. Drüe, M. Seyring, A. Grasemann, M. Rettenmayr:
Materialographic Preparation of Lithium-Carbon Intercalation Compounds
Practical Metallography 53(12), 2016, 745-759,  DOI: 10.3139/147.110422
[18] A. Simon, M. Seyring, S. Kamnitz, H. Richter, I. Voigt, M. Rettenmayr, U. Ritter:
Carbon nanotubes and carbon nanofibers fabricated on tubular porous Al2O3 substrates
Carbon 90, 2015, 25-33,  DOI: 10.1016/j.carbon.2015.03.048
[17] M. Seyring, X.Y. Song, Z.X. Zhang, M. Rettenmayr:
Concurrent ordering and phase transformation in SmCo7 nanograins
Nanoscale 7(28), 2015, 12126-12132,  DOI: 10.1039/c5nr02592c
[16] M. Drüe, A. Kozlov, M. Seyring, X.Y. Song, R. Schmid-Fetzer, M. Rettenmayr:
Phase formation in the ternary system Li-Si-C
Journal of Alloys and Compounds 653, 2015, 474-479,  DOI: 10.1016/j.jallcom.2015.08.235
[15] Z.X. Zhang, X.Y. Song, Y.K. Qiao, W.W. Xu, J.X. Zhang, M. Seyring, M. Rettenmayr:
A nanocrystalline Sm-Co compound for high-temperature permanent magnets
Nanoscale 5(6), 2013, 2279-2284,  DOI: 10.1039/c3nr34134h
[14] W.W. Xu, X.Y. Song, M. Seyring, J.T. He, M. Drue, M. Rettenmayr:
Excess volume in nanocrystalline lithium-carbon system
Micro & Nano Letters 8(3), 2013, 147-150,  DOI: 10.1049/mnl.2012.0961
[13] W. Molnar, A. Lugstein, P. Pongratz, M. Seyring, M. Rettenmayr, C. Borschel, C. Ronning, N. Auner, C. Bauch, E. Bertagnolli:
A General Approach toward Shape-Controlled Synthesis of Silicon Nanowires
Nano Letters 13(1), 2013, 21-25, DOI: 10.1021/nl303152b
[12] A. Kozlov, M. Seyring, M. Drue, M. Rettenmayr, R. Schmid-Fetzer:
The Li-C phase equilibria
International Journal of Materials Research 104(11), 2013, 1066-1078,  DOI: 10.3139/146.110960
[11] J.T. He, X.Y. Song, W.W. Xu, Y.Y. Zhou, M. Seyring, M. Rettenmayr:
Preparation and phase stability of nanocrystalline Li2C2 alloy
Materials Letters 94, 2013, 176-178,  DOI: 10.1016/j.matlet.2012.12.045
[10] M. Drüe, M. Seyring, A. Kozlov, X.Y. Song, R. Schmid-Fetzer, M. Rettenmayr:
Thermodynamic stability of Li2C2 and LiC6
Journal of Alloys and Compounds 575, 2013, 403-407,  DOI: 10.1016/j.jallcom.2013.06.001
[9] M. Seyring, X. Song, M. Rettenmayr:
Orientation and Phase Analysis of Nanoscale Grains Using Transmission Electron Microscopy
Practical Metallography 49(10), 2012, 623-632,  DOI: 10.3139/147.110199
[8] X.Y. Song, Z.H. Sun, Q.Z. Huang, M. Rettenmayr, X.M. Liu, M. Seyring, G.N. Li, G.H. Rao, F.X. Yin
Adjustable Zero Thermal Expansion in Antiperovskite Manganese Nitride
Advanced Materials 23(40), 2011, 4690-+,  DOI: 10.1002/adma.201102552
[7] M. Seyring, X.Y. Song, M. Rettenmayr:
Advance in Orientation Microscopy: Quantitative Analysis of Nanocrystalline Structures
ACS Nano 5(4), 2011, 2580-2586,  DOI: 10.1021/nn1023126
[6] Z.X. Zhang, X.Y. Song, W.W. Xu, M. Seyring, M. Rettenmayr:
Crystal structure and magnetic performance of single-phase nanocrystalline SmCo7 alloy
Scripta Materialia 62(8), 2010, 594-597,  DOI: 10.1016/j.scriptamat.2010.01.001
[5] L.M. Wu, M. Seyring, M. Rettenmayr, W.H. Wang:
Characterization of precipitate evolution in an artificially aged Al-Zn-Mg-Sc-Zr alloy
Materials Science and Engineering A 527(4-5), 2010, 1068-1073,  DOI: 10.1016/j.msea.2009.09.023
[4] W.W. Xu, X.Y. Song, N.D. Lu, M. Seyring, M. Rettenmayr:
Nanoscale thermodynamic study on phase transformation in the nanocrystalline Sm2Co17 alloy
Nanoscale 1(2), 2009, 238-244,  DOI: 10.1039/b9nr00084d
[3] N.D. Lu, X.Y. Song, M. Seyring, M. Rettenmayr, J.X. Zhang:
Preparation and Properties Characterization of the Single-Phased Sm2Co17 Nanocrystalline Alloy
Journal of Nanoscience and Nanotechnology 9(9), 2009, 5141-5144,  DOI: 10.1166/jnn.2009.1203
[2] M. Seyring, X.Y. Song, A. Chuvilin, U. Kaiser, M. Rettenmayr:
Characterization of grain structure in nanocrystalline gadolinium by high-resolution transmission electron microscopy
Journal of Materials Research 24(2), 2009, 342-346,  DOI: 10.1557/JMR.2009.0071
[1] X.Y. Song, N.D. Lu, M. Seyring, M. Rettenmayr, W.W. Xu, Z.X. Zhang, J.X. Zhang:
Abnormal crystal structure stability of nanocrystalline Sm2Co17 permanent magnet
Applied Physics Letters 94(2), 2009, 023102,  DOI: 10.1063/1.3040316

 

Beiträge in Konferenzbänden und andere Publikationen

[13] R. Knechtel, A. Rana, M. Seyring, M. Wenig:
The Use of Glasses in Low-Temperature Wafer Bonding Processes
8th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D) 2024, Nara, Japan
IEEE Xplore, DOI: 10.1109/LTB-3D64053.2024.10774131
[12] M. Seyring, M. Göbelt, D. Thiedke, V. Götz, K. Freiberg, S.Lippmann, R.Knechtel:
Diffusion und Phasenbildung in nanoskaligen Au/Ni/Cu-Schichtsystemen als lotfähige Metallisierung von Mikrochips
Kupfer-Symposium 2023, Jena, ISBN 978-3-910411-03-6, 50-53
[11] R. Knechtel, M. Wenig, S. Svoboda, M. Seyring, M. Göbelt, U. Schwarz, T. Seifert, F. Roscher, M. Wiemer:
Investigation of the Processing Behavior and Stability of Different Glass Frit Materials
ECS Transactions 112 (3), 2023, 229, DOI: 10.1149/11203.0229ecst
[10] R. Knechtel, M. Wenig, M. Seyring, D. Kley:
Investigation of Anodic Bond Formation Process and Potential Use of the Results
ECS Transactions 112 (3), 2023, 207, DOI: 10.1149/11203.0207ecst
[9] M. Seyring, J. Möbius, S.Lippmann:     
Phase formation, crystallography, and eutectoid decomposition in CuZn30||CuZn80 diffusion couples

Intermetallics 2023, Kloster Banz, ISBN: 978-3-948023-33-1, 69-70
[8] K.E. Freiberg, M. Seyring, M. Rettenmayr, A. Undisz:
Phases and Phase Transformation of Ni-Rich Sublayers Below the Surface Oxide on NiTi
SMST 2019 Conference Proceedings, ASM International, 2019 Konstanz, 142-143
[7] M. Seyring, M. Rettenmayr:
Characterizing Single Carbon Nanofibers- Quantitative Analysis by Transmission Electron Microscopy
G.I.T. Imaging and Microscopy 20 (3), Wiley VCH, 2018, 36-38 (invited)
[6] M. Seyring, M. Rettenmayr:
Transmissionelektronenmikroskopie
DGM Jahresmagazin Materialographie/Metallographie, Institut für Wissenschaftliche Veröffentlichungen (IWV) & Deutsche Gesellschaft für Materialkunde e.V. (DGM) 2016, 116-118
[5] M. Seyring:
Materialwissenschaften
Sonderbeilage zu Highlights der Physik, in allen Zeitungen der Mediengruppe Thüringen 12.09.2015
[4] M. Drüe, M. Seyring, A. Grasemann, M. Rettenmayr:
Präparation und Gefüge in Lithium-Kohlenstoff-Legierungen
Sonderbände der Praktischen Metallographie 45, 47. Materialographie-Tagung, Friedrichshafen, 2013, 55-60, 
[3] M. Seyring, X. Song, M. Rettenmayr:
Korngrenzenanalyse in nanokristallinem Kupfer mittels Nano Beam Electron Diffraction
Sonderbände der Praktischen Metallographie 43, 45. Metallographie-Tagung, Karlsruhe, 2011; Werkstoff-Informationsgesellschaft, Frankfurt, 63-68.
[2] X. Y. Song, W. W. Xu, J. Wei, N. D. Lu, M. Seyring, C. Huang, E. D. Li, M. Rettenmayr:
Effects of nano-grain boundaries on grain growth and phase transformation behaviours in nanocrystalline materials
Materials Science Forum THERMEC, Berlin, 2009; Trans Tech Publishers.
[1] M. Rettenmayr, A. Undisz, M. Seyring, X. Y. Song:
Nur Struktur oder schon Funktion?
Sonderbände der Praktischen Metallographie 40, 42. Metallographie-Tagung, Jena, 2008, Werkstoff-Informationsgesellschaft, Frankfurt, 19-24.

 

Gutachtertätigkeit für internationale Fachzeitschriften

  • Scripta Materialia (IF 5.3)
  • Journal of Alloys and Compounds (IF 5.8)
  • Corrosion Science (IF 7.4)
  • Chemical Engineering Journal (IF 13.273)
  • Inorganic Chemistry Frontiers (IF 6.596)
  • Ultramicroscopy (IF 2.689)
  • Journal of Microscopy (IF 1.758)
  • Materialia (IF 3.440)
  • Journal of Vacuum Science and Technology (IF 2.9)
  • Journal of Nano Research (IF 2.929)
  • Superlattices and Microstructures (IF 2.658)

 

Kontaktformular

Mitarbeiter-Form

Zweispaltig
Einpaltig
Zweispaltig
Einspaltig

👋 Hallo!

Ich beantworte deine Fragen zum Studium

HS Schmalkalden Chatbot

Hallo 👋

Dies ist ein Chatbot zur Beantwortung der Fragen von Studieninteressierten.
Mit der Nutzung des Chatbots erklärst du dich einverstanden, dass deine eingegebenen Daten (z. B. Fragen und Antworten) an einen externen Dienstleister übermittelt und dort verarbeitet werden. Die Datenverarbeitung erfolgt ausschließlich zur Bereitstellung der Chatbot-Funktion. Du kannst der Datenverarbeitung jederzeit widersprechen. Weitere Infos findest du in unserer Datenschutzerklärung.